Finds #1 – December 9, 2016

My first of the new series of Finds posts will be a doozy. This Friday, Dez (my wife), and I had the day off so we decided to head into Ft. Lauderdale and hit up some thrifts we’d never been to before. Let me tell you…it was the best idea I’d had in awhile.

The first store we hit up was Tony’s Downtown Thrift Store. I’d never known this store existed, so it was a nice little discovery. The place is the typical “junk shop” type of store; stacks of things everywhere, but an organized mess. It’s half thrift / half consignment, so prices can be all over the place.

I wasn’t expecting to find anything, but I was very pleasantly surprised.

img_0481

In the stacks, Dez found a Thinkpad T60. We had been looking for this EXACT model for her to use as a bedside writing terminal kind of machine. We couldn’t find the charger, but the lady at the counter called the owner and he took the time to drive down just to dig through a pile of power bricks for us. He plugged it in, and it fired right up.

There were also a few stacks of PS3 and 360s, and a bunch of random games. They wanted $10 each or 2/$15 for the pre-ps3/360 era games, $15 for the newer ones. The video game items were a mix of his own inventory and consignment items so the pricing was a generality more than anything else. I picked up the two Vita games since they were still sealed and not on my list.

Tony’s Downtown Thrift Store:
Thinkpad T60 $30
2 Vita games $20


The next stop was the St. Vincent de Paul Thrift Store. This was a small charity store and didn’t have much, but I did find a small stack of games on a rack near the register. Most of what I found were cases with a game, but missing a manual (which I will usually always leave behind), or case and manual but the wrong game, or just empty cases. I took the only two games that were “complete” enough for me to the register. As the lady was checking me out, I mentioned that there were empty cases, etc on the rack and she asked me to pull them so she can toss them. No use in leaving empty cases behind. I offered to pay for them, and she said to just go ahead and take them…so I did.

img_0480

St. Vincent de Paul Thrift Store:
IHRA Drag Racing 2 $2
The Cat in the Hat (Sealed) $2
(The other three cases were just case/manual and were free)


Just up the street was another thrift I never even knew existed; Oddballs Nifty Thrift. This is a shared retail space where people can rent out a room or chunk of floor space and set up their own items for sale. This place was a maze and a mess and I fucking loved it. I love having to dig through piles and piles of random shit to find that diamond hiding somewhere. It’s the biggest chunk of what makes this stupid hobby fun.

There really wasn’t much in the way of gaming or old electronics aside from the kitschy hipster bullshit like Pepsi clock radios from the 50s. Managed to find a few games, and Dez even found a chinese take out purse thingy.

img_0478

Oddballs Nifty Thrift:
Games $2.50 each
Purse $9


Next up was the Out of the Closet thrift store in Wilton Manors. This was my first visit to this particular location. Didn’t see much at first, but Dez was a big help in spotting things here. I needed a disk holder for my 5 1/4″ floppies so that was a no brainer when I found one for a buck. A few shelves down I found this Apple bluetooth “ice cube tray” keyboard. There’s a note on the bottom saying “No receiver included, sold as-is”. Hey, I’ll take a “no receiver included” bluetooth keyboard for $3…

Didn’t really see much in the way of games until Dez spotted them stacked behind the register. I asked the guy behind the counter to pull them down for me and he admitted that he had zero clue what any of them are, as he hasn’t been a video game guy since his original NES 30 years ago.

Now…I could have made up any bullshit and tried to talk the price down since he happened to be the pricing guy for the store, but I didn’t, and I took the time to show him the differences between PSX and PS2, and the different systems that were represented in the stacks. In the end, I pulled out the games in the picture. He even included (not in the picture) Pilotwings Resort for 3DS for $1.

As he was ringing me out, I noticed the Radeon card on the shelf opposite the games stack I had looked through. The guy had no knowledge of it but mentioned that the thing had been reduced in price several times and no one wanted it. When I looked through it, I could see why…all the heatsinks that sat on the ram chips etc had completely fallen off. He said it was down to $1…so for a buck I figured I could fix the damn thing. It’s otherwise complete. The card and the heatsinks and everything are in the original antistatic bag in the box.

img_0482

Out of the Closet – Wilton Manors:
Games $3/$4 each
SMB3 $1.99
Pilotwings Resort (not pictured) $1
Keyboard $3
Disk Box $1
Radeon 9550 $1


After this I felt pretty emboldened and we hit up a retro video store named…Retro Video. This place rents and sells movies in ALL FORMATS. Dude has VHS, Beta, Laserdisc, Blu-Ray…everything. Vinyl, cassettes, 8-track rounds out the music. He also had a small stack of games, and several shelves of random collectibles (action figures, comics, toys).

img_0479

Retro Video:
Games $3 each
Judge Q and Dixon Hill action figures $1.99 each


We hit up a few more places but they were either closed, dry, or furniture consignment stores that are completely useless to me. We decided to make our way home, but stopped at another Out of the Closet location we had hit up just a few days ago. There were some games I left behind but I figured I may as well go broke all in one day so we stopped back in. Glad we did.

I noticed this keyboard on the bottom of a shelf in the electronics section. We pulled it out, it worked perfectly…$30. Done.

img_0477

Out of the Closet – Fort Lauderdale
Yamaha PSR-330 $30
Games $3 each


Altogether I picked up 34 games to add to my pile, some accessories, and Dez got a “new” laptop and keyboard for her own use.

Pretty damn good day of hunting eh?

Catharsis

Here’s my final build for the time being. I’ve run out of (working!) motherboards to build systems around. I do have one or two more nostalgia builds in mind, but those will have to wait until I find the respective parts…and space…

Note: I originally described this build here.

Background:
In 2003, I’d moved back in with my mother. I had gone back to college for a semester and needed a computer. I took what I had left over of my financial aid award, headed to CompUSA, and picked up what I considered to be a decent machine for the money for general home use. The thing was defnitely not a game playing machine of any kind, but everything else it was perfectly adequate at. The only game I 100% remember playing on this was Warcraft III.

The machine itself was a HP Pavilion 504n. 2.0Ghz Celeron on a 845GL motherboard, built in “INTEL EXTREME GRAPHICS!!!”, generic sound, blah blah. It was a perfectly fine for what I needed; IRC, general web stuff, mp3 hoarding and CD burning like a fiend…

Since it was the first machine I personally bought with my own money, I kind of wanted to recreate what I could have put together as a gaming machine at the time. This is an era where I don’t have appropriate parts to recreate, but I’ll do what I can.

I present to you…Catharsis.

Catharsis:
Gigabyte GA-K8NNXP (Socket 754, nForce3-150)
AMD Athlon64 3000+ (2.0GHZ, Clawhammer, ADA3000AEP4AP (C0))
ARCTIC COOLING Silencer64UltraTC L
Hynix 512MB PC3200 DDR 400MHZ CL3
Seagate ST3120213A (120GB U/ATA)
Mitsumi D359M3D (3.5″ Floppy)
H·L GWA-4161B DVD-RW
ASUS V8460ULTRA/128M (GeForce4 Ti 4600 AGP 4x 128MB)
Phillips PSC604 PCI Soundcard

There were several games around this time that I’d played much later on, on much less capable systems. The ones I specifically remember were Max Payne, Deus Ex, Warcraft III + Frozen Throne, and a few others that I really can’t remember right now.

The video card could be upgraded to match the rest of the machine. Possibly a GF 6800 or so, maybe a x300 for the AMD side to keep it all in the family. The sound card is an odd choice, but there are a couple of reasons for it. First…it’s my last PCI sound card. Second, it’s not a Sound Blaster. I’ve never really used dedicated sound cards that didn’t have the Creative label on them so once I finally get things going, it’ll be new to me.

I didn’t take any new pics this time around, but here’s a link to a gallery from when I attempted to actually build this up in a case. The case has since been tossed, so just ignore that part for now.

http://imgur.com/a/9PxZD

Motivation

I’ve been thinking of what projects I want to tackle. There are things I need to do for “work”, and many more things I need to do for “fun”. Projects that fit into the work category obviously should take priority, but I can’t focus too much on one thing at a time. My interests and motivation tend to come in cycles. I’ll obssess over one thing for a week or two, lose interest completely, spend some time unable to think about any one thing, and then the cycle will start over.

To remove the unproductive parts of this cycle, I think I’ll try to schedule certain types of projects for specific days of the week. If I find time to work on something on a given day, it *MUST* be from the assigned category/type of project for that day.

If anyone actually reads this stupid blog, maybe you can pester me for updates as a second form of motivation…maybe…please?

Alright, let’s see if I can make a quick to-do list of the items I currently have bouncing around in the back of my mind, and then see if I can assign days.

To-Do:

D&D Modules
Short Stories
Novel Chapters
Retro PC Builds
Actually Playing Video Games
CLEANING THE HOUSE (Ok, that one is from the wife)
Pounding Through My Backlog Of Books To Read
Stage Plays
Organizing My Hard Drives (I only have a decade+ of shit to go through…)
Non-Fiction Writing (There are things I have interests in)

Let’s try this as a schedule:

capture2
These aren’t hard requirements here, more what I should consider the primary and secondary item for that particular day. If this works, and I can keep to my schedule, I’m sure there are certain people who wish to continue making money off of me who would be very happy.

Wanderlust

Managed to put together my second nostalgia machine tonight.

Background:
In February 1999, I was sent to live with my father in Chicago. I wasn’t able to take my Compaq with me, so I was left with the machine he had at home. He’d only just bought it a few months before, so it was a bit of an upgrade from my Compaq. I managed to find the specs brochure for the exact model.

Basically, it had a PII/350, 64MB PC100, ATI XPERT 98 (Rage Pro Turbo), and some commodity PC98 sound chip.

Since I’d moved there after the middle of the school year, I wasn’t able to officially re-enroll in class. My dad said screw it, take the rest of the year off, and go explore the city and live it up. With all of my freedom, I did what any 16 year old nerd would do…I hung out at CompUSA and bought all the PC mags I could find that had demo disks 🙂

This was the first real exposure I had to real 3D games. I remember very clearly playing the demos for Thief, Blood II, SiN, and a few others. I was blown away with the visuals and sounds in these games compared to what I was able to play on my Compaq back home.

A few months later, I returned to Miami and living with my mom, and I had my Compaq again. I still have very fond memories of staying up late and trying to find new ways to move Garrett around without wasting all of my moss arrows to pad the cobblestone footsteps 🙂

Based on the parts I have, I’ve tried to recreate a machine for that experience. Thusly, I present to you…Wanderlust.

Wanderlust:
ASUS P2B-S
Pentium III 500mhz (SL37D)
128MB PC100 RAM (some obscure Samsung stick taken from a dead B&W G3)
Maxtor 93073U4 (30gb IDE, taken from a CRT iMac)
NEC FD1231M (3.5″ Floppy)
HP GCC-4481B (CDRW/DVD Combo Drive)
Diamond Viper V770 (TNT2 Ultra 32MB AGP)
Sound Blaster Live! CT-4760
3Com EtherLink III PCI (3C590C PCI 10mbps)
(No PSU at the moment, I only have one left)

I may underclock the CPU to the 350 range to approximate the original machine, but only if I find a slower video card to replace the way too fast TNT2 Ultra. If I can find a Rage 128 or so, I may swap that in and clock down the CPU. You can see my not-quite subtle inquiries about the Rage series in a thread on Vogons here.

I didn’t manage to take any pictures of the parts before I wrapped them up and boxed them, but you guys can check out the pretty blue Ikea box I put them in!

wan01

Reminiscence

Ok, I really just need to get these parts squared away so I can pack them up till I find some ATX cases. I present to you…Reminiscence.

Reminiscence:
AOpen AX59Pro
Pentium 166MHZ MMX (retail version)
2x Crucial CT4M36P2M (16MB FPM Parity)
Seagate Medalist 4310 (ST34310A, 4.3GB)
Panasonic JU-256A217P Rev.F (3.5″ Floppy)
Sony DDU-1621 (DVD-ROM)
Diamond Viper V330 (Riva 128 4MB AGP)
Cardex Dragon 1000 (Voodoo1 4MB)
Sound Blaster AWE64 Gold
3Com Etherlink III (3C509TP ISA 10mbps)
(Uh…forgot to write down the model of PSU, but it’s an Enlight 250w something or other)

Here she is being tested:

rem01

And all boxed up for later:

rem02

As soon as I find an ATX case that fits my picky requirements, I’ll properly case her up and do some proper testing and benching.

This machine is meant to recreate the Compaq Presario 4808 I had as a kid. The parts are different, but the feel is meant to be the same. There are definite upgrades here compared to what I had before, but hey…it’s 2016 🙂

The usage scenario for this machine is to go back and play the games I did between the years of mid-97 through about late-99. Now, I did have access to a newer machine during this time, but only for a few months. This was my primary machine.

I had several late DOS games, 1994 or so and later and they all ran just fine on the original. I skirted the early 3D craze with just the Trio64V2+/GX I hadin the original machine, so this will give me a chance to play things the way they were meant to be played.

I won’t have a chance to give this build a proper workout till I get a case for her, but here she is for now.

That didn’t go as I had intended

One post. That’s as far as I made it for Retrochallenge. I knew I’d peter off at some point, but damn.

If anyone came looking for more of my project, I’ll have a more detailed write-up soon. In short, I needed to replace a single discreet chip and I stopped there as I don’t currently have the tools to do any kind of board-level repairs. I will return to it once I’ve acquired the tools I need, but I’m not sure how long that will take.

In other news, I’ve been asked to document my PS Vita physical release hunting. I’m not going to go nuts like the last time…

header

I’m up to 22 physical games. This time around it’s going to be, “Only things in a box that I could pick up in a store in North America.” Plus a little, “Special Limited release stuff like from Limited Run Games.”

I’ll have an intro written up for that later too.

Retrochallenge 2016/1

Well, I’ve decided it’s finally time to throw my hat in the ring and participate in a Retrochallenge. Being that this will be during what is traditionally considered the Winter Warm-Up round, I figured it was as good a chance as any to get my feet wet.

I’ll be doing something rather tame for my first go, but it’ll do to get the retro juices flowing.

I have an Atari 800XL and 1050 floppy drive that need some love and care. I’ve also got a box of random Atari floppies that a friend sent to me and I have yet to go through them.

Assuming I can get the hardware functional and able to read the floppies, part two will be to go through the disks and catalog exactly what’s on them…if I can figure out how the hell Atari files and disk structures work.

Either way, it’ll be fun to mess around with the old hardware. Never know, might find a copy of AtariWriter or something else in there I can use for first-hand experience in my productivity software research.

Office Suites

I’ve long been fascinated by Office software. The very first computer that my family brought home had Microsoft Works 3.0 pre-installed. For many first-time computer buyers in the mid-90s, this was a very common thing to find on your hard drive. The one program that stated how easy it would make your life intrigued me and I played around with the different modules. At 12, I had no clue what spreadsheets or databased really were, but the word processing module was like a typewriter on a screen, so I grasped that part relatively quickly.

Over time, I figured out how to use the other modules, though I had little use for them as a kid. In school, most of the computers were Apple and thus had ClarisWorks on all of them. A few had the other common Mac software from years earlier, MacWrite, WriteNow, etc. It wasn’t until high school when I was doing my summer volunteer hours at a hospital that I had my first real exposure to full-fledged productivity software, Microsoft Office.

I knew that the programs that made up Office were essentially the bigger brothers to the integrated packages I’d been used to, but I didn’t really understand how they all worked together in a business setting. I’d just never had any experience with that level of use. As time went on, I looked into other software, collected what I could find, tried others out. I spent a few years bouncing between different computers just to try out older versions and obscure, long-dead packages.

I’ll be using this blog as a place to offer up the in-progress research I’m doing on the history and evolution of Office Suites. Hopefully, someone will find the information useful, or at least entertaining. Either way, I’ll be enjoying every bit of it.